服务热线:

0571-87151519

扫描二维码关注更多资讯

新闻资讯

  • 别墅家用中央空调安装,作为业主这些细节你不得不考虑清楚
  • 本站编辑:杭州鑫火实业有限公司发布日期:2019-12-15 16:09 浏览次数:

别墅装修与很多普通平层装修一样,需要水电、泥工、木工等,但也很不一样,无论是材料、工艺、管路走向等都很不同。别墅中央空调和一般家用中央空调安装也有很大不同,由于别墅面积较大,较之于平层一般外机的功率较大,因为体积也就较之平层会更大。由于大部分别墅都有跃层设计,别墅中央空调的管道走线等都需要特别设计。还有一些要求特别高的,则需要提供产品打样,这个时候,各部门的沟通就显得特别重要。

那么别墅中央空调的安装,需要考虑哪些细节呢?

2-160P9164056-50.jpg

一、别墅中央空调室内机安装需要注意的事项:  

  1.  与装修方确定吊顶高度,结合内机的厚度,确保空调正常运行。

  2.  确定出风口,进风口,以及检修口的形状和位置,确保不影响设计的美观。  

  3.  进风口周围不要防置阻碍空气吸入的障碍物。  

  4.  吹出的冷气应流过人活动的主要场所,排风口附近无障碍物。   

  5. 不要靠近高频设备、高功率无线装置的地方,以免干扰空调的正常工作。   

  6.  室内机安装位置附近不能有电源(如电热器、燃气炉灶等)和蒸汽源等。 

二、别墅中央空室外机安装需要注意的事项:  

  1.室外机安装位置选择尽可能离室内机较近的室外,且通风良好。  

  2.要避免安装在有可燃性气体泄露的地方。  

  3.为保持空气流畅,外机的前后、左右应留有一定的空间。  

  4.避免阳光直晒,如有必要配上遮阳板,但不能妨碍空气流通。  

  5.先择排出热风及运转噪音不影响邻居生活的地方。  

  6.安装在不会增大噪音的紧固台上。  

  7.尽量不要安装在路边等易淋泥水的场所。  

  8.选择排风口无障碍物的地方。  

  9.预留出检修位置,方便今后的维修操作。   

  10.尽可能注意外机排水处理,有条件的情况下,做排水沟排水。 

做为业主方,最重要的是做好沟通工作,建立沟通桥梁,无论是装修公司,还是暖通公司,做到随时沟通,遇到问题能相互协商解决,而不能为了解决自已的问题而影响第三方的施工。很多别墅工程项目,装修过程中会建立合作施工群,把所有参与施工的所有人员都放到一个群里,遇到问题随时发布动态,方便大家看到问题,分析问题,解决问题。别墅中央空调安装进场早,离场晚,几乎贯穿整个装修过程。所以业主所在的沟通渠道就显得非常重要。

Villa decoration, like many ordinary flat decoration, needs water and electricity, mud work, carpentry, etc., but it is also very different, no matter the material, technology, pipeline direction, etc. Villa central air conditioning and general household central air conditioning installation are also very different. Because the villa area is large, compared with the flat floor, the power of the general external machine is larger, because the volume will be larger than the flat floor. Because most villas have the design of leaping floors, the central air-conditioning pipeline of villas needs special design. There are also some special requirements, which need to provide product proofing. At this time, the communication between various departments is particularly important.

So what details need to be considered for the installation of villa central air conditioning?

I. precautions for installation of indoor unit of villa central air conditioner:

1. Determine the ceiling height with the decoration party, and ensure the normal operation of the air conditioner in combination with the thickness of the internal machine.

2. Determine the shape and position of the air outlet, air inlet, and maintenance port to ensure that they do not affect the beauty of the design.

3. Do not place obstacles around the air inlet to prevent air intake.

4. The air conditioner blown out shall flow through the main place of human activities, and there shall be no obstacles near the air outlet.

5. Do not close to high-frequency equipment and high-power wireless device to avoid interference with the normal operation of air conditioner.

6. There shall be no power supply (such as electric heater, gas stove, etc.) and steam source near the installation location of indoor unit.

II. Precautions for installation of villa central air outdoor unit:

1. The outdoor unit shall be installed as close to the indoor unit as possible, with good ventilation.

2. It shall be avoided to be installed in the place with combustible gas leakage.

3. In order to keep the air smooth, there should be a certain space in front, back, left and right of the external machine.

4. Avoid direct sunlight, if necessary, install sunshade, but do not hinder air circulation.

5. Select the place where the hot air and running noise will not affect the life of neighbors.

6. It shall be installed on the fastening platform that will not increase the noise.

7. Try not to install it on the roadside and other places where mud is easy to get wet.

8. Select the place where there is no obstacle at the air outlet.

9. Reserve the maintenance position for future maintenance.

10. Pay attention to the drainage treatment of the external machine as much as possible, and make drainage ditch when conditions permit.

分享到:QQ空间新浪微博腾讯微博人人网微信